PLAIN ROUND Chrome Stick 7438 for Hurst shifters 1969 Camaro & Firebird

Description

PLAIN "round bar" chrome shifter stick #
7438
:
10.76" tall, bends 3.74" rearward and 1.45" left
Interchanges with flat stick #7436
Similar to OE #5325 but with bolt-on mount (not compatible with OEM shifters)
3/8"-16 knob threads
Forged mild steel - case-hardened for toughness, chrome-plated for beauty
"PLAIN sides - NO LOGO -
NOT a Hurst part!
Mating serrations
for Hurst stub mount are
stamped into left side
WARNING: Do not weld, bend, or modify a case-hardened part like this
as it will create a weak spot that can lead to catastrophic failure
Great for custom installations -
measure before you buy!
Mounts via
3/8" bolt holes spaced 7/8" apart
- fits any aftermarket Hurst stub
Many off-brand shifters use 8mm stick bolts - requiring
special adapter bolts
Mix parts carefully as
proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
Stick length = 11.4"
(distance from mount to knob) - see swap bases for fulcrum options
Interchanges with Hurst #5387438
IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed
- sit in vehicle with tape measure while studying
Hurst catalog - stick section
.
Replaces flat stick #7436 on the following external linkage Hurst shifters
for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit
(see
Hurst catalog)
:
3917438 for 1969 Camaro (all models w/ muncie, w/ & w/o console)
3917438 for 1968-69 Firebird & Trans Am (muncie w/ & w/o console
3917438 for 1973-77 Camaro & Firebird (saginaw w/ console)
3667954 for 1968-72 Chevelle w/ muncie 3 speed only (Mastershift, discontinued)
NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned.
Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.
This stick also fits the following Core internal rail shifters -
matching base required, not compatible with stock shifters
(see complete kits):
Core Shifters kits for 1983-1990 Ford Ranger - except M5R1