Hurst Chrome Shifter Stick Handle 16.5" tall #4331 Ford Chevy Truck 4 speed

Description

Hurst chrome shifter stick #
4331
:
16.0" tall, bends forward ~3.5" and then curves back to end with knob above stub
3/8"-16 knob threads
Forged mild steel - case-hardened for toughness, chrome-plated for beauty
"HURST" imprinted on both sides in mid-section
Mating serrations
for Hurst stub mount are
stamped into left side
WARNING: Do not weld, bend, or modify a case-hardened part like this
as it will create a weak spot that can lead to catastrophic failure
Great for custom installations -
measure before you buy!
Mounts via
3/8" bolt holes spaced 7/8" apart
- fits any aftermarket Hurst stub
Many off-brand shifters use 8mm stick bolts - requiring
special adapter bolts
Mix parts carefully as
proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
Stick length = 16.0"
(distance from mount to knob) - see swap bases for fulcrum options
Genuine Hurst part in bulk form - no retail pkg
IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed
- sit in vehicle with tape measure while studying
Hurst catalog - stick section
.
This stick is used by the following external linkage Hurst shifters
for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit
(see
Hurst catalog)
:
3910001 for 1/2 ton Chevy & GMC truck w/ Saginaw 4 speed swap
3910001 for 1/2 ton Ford truck w/ Top Loader 4 speed swap
3910002 for 1/2 ton Chevy & GMC truck w Muncie or T10 4 speed swap
3666809 for 1955-1989 Chevy & GMC truck (2wd) w/ 3 speed (Mastershift)
3666809 for 1963-1987 Ford truck 2wd w/ 3 speed (Mastershift)
3666809 for 1975-1979 Ford van w/ 3 speed (Mastershift)
NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned.
Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.
Complete your installation with a
"HURST EQUIPPED" emblem
!